亚洲AV精品国产首次亮相

      <track id="zgail"></track>
    1. <pre id="zgail"></pre>
      <table id="zgail"><option id="zgail"></option></table>
      <pre id="zgail"></pre>

      我的訂單|我的收藏|我的商城|幫助中心|返回首頁
      合肥蕪湖滁州蚌埠晟暉>新聞>高壓清洗機新聞

      京山洗地機

      文章來源: 作者: 發布時間:2020年05月22日 點擊數: 字號:

      京山洗地機地面洗地機日常檢查處理辦法

      Daily inspection and treatment of floor washing machine

      京山洗地機為了找出運動問題的原理,我們可以從以下四個方面進行分析:

      In order to find out the principle of motion problem, we can analyze it from the following four aspects:

      1.洗地機軸承出現缺油或間隙過小的現象,使軸承出現劇烈沖突,表現為過熱狀態。

      1. The bearing of the washing machine is short of oil or the clearance is too small, which causes the bearing to conflict violently and shows overheating.

      二、機器使用已久,軸承磨損嚴重,轉子軸彎曲或盤安裝不正確,導致轉子磁極與定子鐵心相撞,即掃孔。

      2、 The machine has been used for a long time, the bearing is seriously worn, the rotor shaft is bent or the disk is not installed correctly, resulting in the collision between the rotor pole and the stator core, i.e. hole cleaning.

      3.京山洗地機匝間短路、開路或定子線圈接線不當導致洗地機電機發生短路電流。

      3. Turn to turn short circuit, open circuit or improper stator coil wiring lead to short circuit current of the washer motor.

      4.發電機運行量大,超載嚴重。

      4. The generator has a large amount of operation and serious overload.

      當你發現問題時,把問題弄清楚,想辦法解決它:

      When you find a problem, make it clear and find a way to solve it:

      1.京山洗地機當我們出售洗地機時,我們會提倡用戶在使用洗地機的過程中定期維護和檢查電機,這樣可以提高操作效率,及時發現疑點。如果是由于缺乏油,應該及時添加復合鈣基潤滑脂,使其能夠填充軸承腔的2/3。

      1. When we sell the washing machine, we will encourage users to regularly maintain and check the motor during the use of the washing machine, so as to improve the operation efficiency and find out doubts in time. If it is due to the lack of oil, the compound calcium base grease should be added in time so that it can fill 2 / 3 of the bearing cavity.

      二.如果你發現軸承彎曲或部分磨損,這也是電機過熱的形成因素,我們需要更換軸承,校對轉子軸,鐵芯等。

      2、 If you find that the bearing is bent or partially worn, which is also the cause of motor overheating, we need to replace the bearing, calibrate the rotor shaft, iron core, etc.

      3.使用萬用表法或試驗燈法檢查定子線圈是否短路或是否開路,如果是,應從零開始卷繞,使之成為子線圈。

      3. Use multimeter method or test lamp method to check whether the stator coil is short circuited or open circuited. If so, it should be wound from zero to make it a sub coil.

      4.檢查電機是否為負載工作,是否與發電機匹配,如果不匹配,應予以更換。

      4. Check whether the motor works under load and matches the generator. If not, replace it.

      綜上所述,京山洗地機地面洗地機電機過熱的原因是多方面的,因此我們可以利用它對洗地機的結構、附件和工作原理有一個清晰的認識,以便及時解決在運行中可以處理的一些小問題,以免影響運行。

      To sum up, there are many reasons for the over heating of the floor washer motor, so we can use it to have a clear understanding of the structure, accessories and working principle of the floor washer, so as to solve some small problems that can be handled in operation in time, so as not to affect the operation.

      地區導航: 六安| 合肥| 蚌埠| 巢湖| 池州| 滁州| 阜陽| 淮北| 淮南| 黃山| 馬鞍山| 銅陵| 蕪湖| 宿州| 宣城
      北京| 天津| 上海| 重慶| 烏魯木齊| 拉薩| 銀川| 呼和浩特| 南寧| 哈爾濱| 長春| 沈陽| 石家莊| 濟南| 南京| 杭州| 福州| 廣州| ???/a>| 昆明| 貴陽| 成都| 長沙| 武漢| 鄭州| 太原| 蘭州| 西寧| 南昌

      亚洲AV精品国产首次亮相

          <track id="zgail"></track>
        1. <pre id="zgail"></pre>
          <table id="zgail"><option id="zgail"></option></table>
          <pre id="zgail"></pre>